Rear Lid Control Module -J605-, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
-- Lower the luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2-.
-- Release the retainers -A arrows- from the Rear Lid Control Module -J605- -1-.
-- At the same time, push the Rear Lid Control Module -J605- -1- in the direction of -arrow B- until it stops.
-- Remove the Rear Lid Control Module -J605- -1- forward from the body.