Tightening Specifications

• Refer to OVERVIEW - SUBFRAME
• Refer to OVERVIEW - STEERING GEAR 
• Wheel Bolts. Refer to WHEEL BOLTS, TIGHTENING TO SPECIFICATION .
• Pendulum support bolts. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
• Noise insulation bolts. Refer to OVERVIEW - NOISE INSULATION .
• Exhaust system to subframe. Refer to OVERVIEW - EMISSIONS CONTROL SYSTEM (2.0L) or OVERVIEW - EMISSIONS CONTROL SYSTEM (3.6L) .

If the steering wheel is still crooked after using the : T10486/1  then an axle alignment is necessary. In this case the record it in the vehicles axle alignment log.