ATF Lines Complete With Adapter, Removing And Installing: Removing

-- Lift the vehicle, all four mounts from lifting platform at the same height.

-- Move the selector lever to >>P<<.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING (2.0L) or AIR FILTER HOUSING, REMOVING AND INSTALLING (3.6L) .

-- Remove the front bumper. Refer to OVERVIEW - LOCK CARRIER .

-- Remove the radiator shutter. Refer to RADIATOR SHUTTER, REMOVING AND INSTALLING (2.0L) or RADIATOR SHUTTER, REMOVING AND INSTALLING (3.6L) .

-- Remove the bolts -arrows- and the ATF lines -1- from the thermostat -2- and ATF cooler -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Seal the connections on the radiator and thermostat with suitable plugs taken from the Engine Bung Set: VAS6122  .