Transmission Tightening Specifications: Notes
| Item | Bolt | Nm |
|---|---|---|
| 1, 2 and 3 | M12x55 | 80
|
| 4 | M12x65 | 80 |
| 5, 6 and 7 | M10x50 | 40 |
| 8 | M12 x 70 | 80 |
| A | Alignment sleeves for centering | |
NOTE:
Bolt -3- accessible only after removing the starter.
| Component | Nm |
|---|---|
| Subframe mount to transmission (replace the bolts after removal) | 60 + 90° additional turn |
| Ground cable to subframe mount | 25 |
| Right drive axle heat shield to bevel box | 20 |
| Driveshaft to bevel box | Refer to OVERVIEW - DRIVESHAFT . |
Bevel box to transmission
|
40 Nm + 90° additional turn |