Threaded Bushing, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
NOTE:
Always drive out the threaded bushing from above in the direction of the steering shaft.
-- Insert the threaded bushing in straight.
-- Drive in the threaded bushing until stop.
-- Position the steering gear -1- on the subframe.
-- Insert the steering gear threaded sleeves -2- in the subframe holes -arrow-.
-- For vehicles with a level control system sensor, perform the basic setting using the Vehicle Diagnostic Tester.