Cell Phone Preparation
Bluetooth hands-free calling is integrated in the Information Electronics Control Module 1 -J794-.
Operation takes place via the Front Information Display Control Head -J685- or via the Cellular Telephone -R54-.
The Cellular Telephone -R54- is connected via Bluetooth.
The Bluetooth Antenna -R152- is installed in the Information Electronics Control Module 1 -J794-.
The hands-free calling consists of the following components:
- Front Information Display Control Head -J685-
- Information Electronics Control Module 1 -J794- with Bluetooth Antenna -R152-
- Telephone Microphone -R38-
- Optional Storage Compartment with Cell Phone Interface -R265-
Fault Finding is performed using the Vehicle Diagnostic Tester.
Notes on Bluetooth technology
A standardized radio connection is used for data transfer between the Information Electronics Control Module 1 -J794- and Cellular Telephone -R54- - Bluetooth Technology.
An additional transmitter/receiver unit is installed in the Information Electronics Control Module 1 -J794-. A Bluetooth Antenna -R152- connects the Information Electronics Control Module 1 -J794- and Cellular Telephone -R54- so that the Cellular Telephone -R54- can be operated wirelessly (no wire connection).
The range is approximately 10 meters.