Mounting Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The following describes the removal and installation of the left mounting bracket. The right side is identical.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- Depending on the version, remove the cap for or without the lock cylinder (refer to DOOR HANDLE CAP, REMOVING AND INSTALLING ) and the lock cylinder (refer to LOCK CYLINDER, REMOVING AND INSTALLING ).

-- Remove the door handle. Refer to DOOR HANDLE, REMOVING AND INSTALLING .

-- Remove the door inner cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .

-- Remove the bolt -4-.

-- Remove the mounting bracket -1- with the cable -2- from the door in direction of -arrow d-.

Cable, Loosening

-- Pivot the retainer -5- slightly in direction of -arrow a-.

-- Remove the cable pin out of the mount in direction of -arrow b-.