Lock Carrier, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Guide Pins:T10093

Fig 1: Guide Pins T10093
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench, 6-50Nm:VAG 1331A

Fig 2: Ident ifying Torque Wrench (5 To 50 Nm) V.A.G 1331
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench, 40-200Nm:V.A.G 1332A

Fig 3: Identifying Torque Wrench 40-200 Nm V. A. G 1332
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The lock carrier is a safety related component. For this reason the lock carrier may only be serviced in the specified positions.

Replace the lock carrier if it is damaged.

For vehicles with the Control Module for Adaptive Cruise Control -J428-, the Control Module for Adaptive Cruise Control -J428- must be realigned every time the lock carrier is removed and installed or replaced.

Information and work procedures for the Control Module for Adaptive Cruise Control -J428-. Refer to ADAPTIVE CRUISE CONTROL ASSEMBLY .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.