Rear Axle Toe, Adjusting
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench, 40-200Nm:VAG1332A
-- Loosen the nut -1-.
-- Turn the eccentric screw -2- until the specified value is reached.
NOTE:
The maximum adjustment range is 90° to left or right of center position.
-- Tighten the nut -1-.
-- After the nut -A- is tightened, check the toe value again. Refer to AXLE ALIGNMENT SPECIFIED VALUES .
Tightening Specifications
- Refer to OVERVIEW - TRANSVERSE LINK