Measurement Preparations, Axle Alignment Without Driver Assistance Systems
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wheel Alignment Computer:VAG1813F or VW/Audi approved wheel alignment devices
- Brake Pedal Actuator:VAG1869/2 .
- Insert Tool - 18mm:T10179
- Shock Absorber Set:T10001
The lateral run-out of the wheel must be balanced (compensated for). Otherwise, the measurement result will be false.
A correct toe-in adjustment will not be possible without performing lateral run-out compensation!
Follow the operating instructions provided by the manufacturer of the alignment equipment.
-- Carry out wheel run-out compensation.
-- Insert the :VAG1869/2 .
-- Actuate the brake pedal using brake pedal actuator.
Preparation Work for Calibrating Driver Assistance Systems