SERVICE INTERVAL DISPLAY, RESETTING WITHOUT Vehicle Diagnosis Tester

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Resetting the oil change service with analog instrument cluster

Using the button in the instrument cluster:

-- With the ignition turned off, hold the -1- button pressed.

Courtesy of AUDI OF AMERICA, LLC

-- Switch the ignition on.

Wait until "Reset oil change?" appears in the display.

-- Release the button -1-.

The service interval display is now in reset mode.

-- Briefly press the button -1- once.

After a brief period, the display switches back to the normal display.

Resetting the inspection with analog instrument cluster

Using the button in the instrument cluster

-- With the ignition turned off, hold the -1- button pressed.

Courtesy of AUDI OF AMERICA, LLC

-- Switch the ignition on.

Wait until "Reset inspection service?" appears in the display.

-- Release the button -1-.

The service interval display is now in reset mode.

-- Briefly press the button -1- once.

After a brief period, the display switches back to the normal display.

Resetting the service interval display with a digital instrument cluster Pro version

On vehicles with a digital instrument cluster the service interval display can only be reset via the service menu.

-- Select the "range" information profile in the instrument cluster and then hold the OK in the multifunction steering wheel pressed for approximately 4 seconds.

The service menu appears.

-- Using the button in the multifunction steering wheel select the "Service" menu, follow the instructions in the instrument cluster and reset the corresponding service.

Resetting the service interval display with a digital instrument cluster Basic version

On vehicles with a digital instrument cluster the service interval display can only be reset via the service menu.

-- Select the secondary display "driving time/distance" in the instrument cluster and then hold the ← and ↓ button on the multifunction steering wheel pressed for approximately 6 seconds in the same direction.

The service menu appears.

-- Using the button in the multifunction steering wheel select the "Service" menu, follow the instructions in the instrument cluster and reset the corresponding service.