Front Backrest, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all safety precautions when working with pyrotechnic components.
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
Install in the reverse order of removal while noting the following:
-- Replace any damaged cable ties and clips.
-- Route the wires in their original locations.
Backrest Tightening Specification and Sequence
| Step | Bolt | Tightening Specification |
|---|---|---|
| 1 | -1 through 4- | Install all the way by hand |
| 2 | -1- | 35 Nm |
| 3 | -2- | 35 Nm |
| 4 | -3- | 35 Nm |
| 5 | -4- | 35 Nm |