ATF Lines From Adapter To ATF Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Lift the vehicle, all four mounts from lifting platform at the same height.
-- Move the selector lever to >>P<<.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the front bumper. Refer to OVERVIEW - LOCK CARRIER .
-- Remove the radiator shutter. Refer to RADIATOR SHUTTER, REMOVING AND INSTALLING - 4 CYL or RADIATOR SHUTTER, REMOVING AND INSTALLING - 6 CYL .
-- Remove the bolts -arrows- from the ATF cooler -2- and adapter -3- and remove the ATF lines -1-.
-- Remove the ATF lines -1- from the radiator and adapter -arrows- and remove.
-- Seal the connections on the radiator and adapter with suitable plugs taken from the Engine Bung Set:VAS6122 .
The ATF lines -2- remain installed.