ATF Cooler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
-- Always replace the O-rings -arrow-.
-- When installing the right and left bracket of the ATF cooler -1- push all the way in the tabs -arrow- on the radiator -3-.
-- Install and tighten the bolts -4-.
-- Install the ATF line -1- on the radiator -3-.
-- Install the radiator shutter. Refer to RADIATOR SHUTTER, REMOVING AND INSTALLING - 4 CYL or RADIATOR SHUTTER, REMOVING AND INSTALLING - 6 CYL .
-- Install the front bumper. Refer to OVERVIEW - LOCK CARRIER .
-- Bleed the ATF circuit. Refer to ATF CIRCUIT, BLEEDING .