Diagnostic Entries

After performing the following steps, the adaptation values must be adapted:

• Engine was replaced
• The sensor wheel for the Engine Speed Sensor -G28- was replaced
• The components of the chain drive were removed and installed or replaced
• The cylinder head was removed and installed or replaced
• The camshafts were removed and installed or replaced
• The Engine Temperature Control Actuator -N493- was replaced
• The turbocharger or the Charge Air Pressure Control Module -GX34- was replaced
• The Throttle Valve Control Module -GX3- was replaced.
• Particulate filter was replaced

Adjust the Adaptation Values after "replacing components"

• 0001 - Engine Electronics
• 0001 - Engine electronics functions
• 0001 - Steps after replacing components