Connection Diagram - Engine/Motor Compartment EVAP System, Vehicles With 1.5L Engine From My 2020

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 - Separating Point
- For the vent/fuel lines
2 - Bleeder Line
- Between the air duct pipe and the connection on the turbocharger
3 - Connection on Turbocharger
- Overview. Refer to OVERVIEW - TURBOCHARGER, DNPA, DNNA, DNND AND DRNA .
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING, DNPA, DNNA, DNND AND DRNA
4 - Bleeder Line
- To the connection on the turbocharger
5 - Air Duct Pipe
- Between the charge air cooler and the turbocharger
- Overview. Refer to OVERVIEW - CHARGE AIR SYSTEM, DNPA, DNNA, DNND AND DRNA .
- Removing and Installing. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING, DNPA, DNNA, DNND AND DRNA
6 - Intake Manifold
- Overview. Refer to OVERVIEW - INTAKE MANIFOLD .
- Removing and Installing. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .
7 - Bleeder Line
- Between the separating point in the engine/motor compartment and the connection on the turbocharger
8 - Air Duct Pipe
- Between the charge air cooler and intake manifold
- Overview. Refer to OVERVIEW - CHARGE AIR SYSTEM, DNFC, DNFE, DNFF, DNFG, DSFB, DSFE AND DSFF .
- Removing and Installing. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING, DNFC, DNFE, DNFF, DNFG, DSFB, DSFE AND DSFF
9 - Pulsation Damper
A - Activated Charcoal Filter Air Flushing Pressure Sensor -GX44-
B - EVAP Canister Purge Regulator Valve 1 -N80-
C - Check Valve