Seat Belt Webbing, Checking

Procedure

-- Pull the belt completely out of the automatic belt retractor or lap belt adjustment tongue.

-- Check the seat belt webbing for contamination, wash with mild soapy water if necessary. Refer to the appropriate Service Information.

• If one of the types of damage (1 and 2) shown in the following is detected on a vehicle which has been in an accident, the entire seat belt must be replaced with the belt latch.
• If damage under points 1, 2, 3 and/or 4 is detected on a vehicle not involved in an accident, then only the damaged seat belt needs to be replaced.
• 1 -  Seat belt webbing cut, torn or frayed.
  Fig 1: Belt Webbing Cut, Torn Or Chafed

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• 2 -  Webbing loops on seat belt edge torn.
  Fig 2: Checking Belt Webbing - Webbing Loops On Belt Edge Torn

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• 3 -  Burn marks from cigarettes or similar.
  Fig 3: Burn Marks From Cigarettes Or Similar

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• 4 -  One side of belt edge deformed or area of belt edge is wavy.
  Fig 4: Belt Edge Deformed On One Side And/Or Belt Edge Area Is Wavy

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.