Transmission Tightening Specifications

Fig 1: Identifying Tightening Torques, Transmission To Engine (2.5L - 110 kW Engine, Tightening Torques)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. 1 -  Direction of Travel
2. -  Drive Plate to Torque Converter
   • 60 Nm
   • Quantity: 6, with Socket - Sw15: V/175  , Removing and Installing
3. -  M12 Bolts
   • 80 Nm
   • 65 Nm, if using Insert Tool - 18mm: T10179 
4. -  M10 Bolts
   • 40 Nm
   • The bolts are located in the lower flange
5. -  Two Alignment Sleeves Inside the Engine -arrows-

Only 2.5L Engine 

-- Make sure the bracket does not touch the ATF cooler.

Fig 2: Identifying Selector Lever Cable Retainer And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-Nuts- 8 Nm