Securing On Engine And Transmission Holder

Special tools and workshop equipment required

Holding Fixture: VW313
Holding Fixture: VW540
Engine and Gearbox Bracket VAS6095A : VAS6095A

Remember there is oil in the transmission. Do not turn the transmission with the vents facing downward when transporting or when it is on the assembly stand. The oil will leak out.

NOTE:

Remove the bleed cap if necessary and seal using suitable oil-tight plugs.

-- Secure the transmission on the Holding Fixture: VW540 -arrows-.

Fig 1: Identifying Transmission To Holding Fixture VW 540 And VW 313

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the transmission using the Shop Crane: VAS6100 in the Holding Fixture: VW313 or the Engine and Gearbox Bracket VAS6095A: VAS6095A .

WARNING:

The center of gravity of the transmission is outside the center of rotation at holding fixture. To prevent back swing, a second technician must hold transmission housing when rotating the transmission on the Holding Fixture: VW313 .