ATF Cooler, Removing And Installing, Round Version: Installing
- Tightening specification. Refer to ATF COOLER, ROUND VERSION .
Install in reverse order of removal while paying attention to the following:
NOTE:
Always replace the O-rings.
-- Install the plate spring -item ) ATF COOLER, ROUND VERSION - List Item: Plate Spring:
- It must contact the washer -item ) ATF COOLER, ROUND VERSION - List Item: Washer.
- The convex side of the plate spring faces up.
-- Insert the tab -arrow B- into the opening in the transmission housing when installing the ATF cooler -1-.
-- Connect the coolant hoses to the ATF cooler according the markings made during the removal.
-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .
-- Install the battery tray and the battery. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
-- Check the ATF level. Refer to ATF .
-- Install the engine cover and the air filter. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .