Seals And Gaskets
O-Rings, Seals, Gaskets and Oil
- Always replace the O-rings, gaskets and seals.
- After removing gaskets and seals, examine the contact surface on housing/shaft for burrs resulting from removal or for other signs of damage.
- Coat O-rings with ATF before inserting to prevent crushing rings during installation.
- Use ATF only. Other lubricants cause malfunctions in the hydraulic transmission control.
- Lightly coat the seals with ATF along the outer circumference and on the sealing lip -arrow-.
- The open side of the seals faces the oil.
- Check the ATF level after installing. Refer to ATF .