Overview - Door Components
- Window Guide
- Removing and Installing. Refer to WINDOW GUIDE, REMOVING AND INSTALLING .
- Front Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Adjusting. Refer to DOOR, ADJUSTING .
- Sticker
- 40 mm (1.57 in.) diameter
- Use commercially available duct tape if needed
- Insulation
- Self-adhesive
- Installing:
-- Cut to size if necessary, 200 mm x 100 mm (7.87 x 3.94 in.). Position as shown in the image.
-- Warm up using the Wiring Harness Repair Set - Hot Air Blower :VAS1978/14A and then press firmly onto the outer door panel.
- Door Inner Cover
- Removing and Installing. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
- Inner Window Shaft Strip
- Removing and Installing. Refer to INNER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
- Outer Window Shaft Strip
- Removing and Installing. Refer to OUTER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
- Sticker
- Quantity: 3
- 15 mm x 50 mm (0.59 x 1.97 in.)
- Use commercially available duct tape if needed