Axle Alignment Specified Values, Torsion Beam Axle: Notes

Specified values valid for all engine versions.

Front Axle

Basic Suspension

Sport Suspension

Raised Suspension

PR numbers

G03/G12/G20

G04/G21

G10/G14/G22

Total toe (wheels not pressed)

10' ± 10'

Camber (wheels in straight-ahead position). Refer to ⁽¹⁾.

-30' ± 30'

-41' ± 30'

-16' ± 30'

Maximum permissible difference between both sides

maximum 30'

Toe differential angle at 20° steering angle. Refer to ⁽²⁾.

1° 19' ± 20'

1° 30' ± 20'

1° 09' ± 20'

Caster

7° 23' ± 30'

7° 38' ± 30'

7° 09' ± 30'

Maximum permissible difference between both sides

maximum 30'

Height. Refer to Height, Measuring .

383 ± 10 mm

368 ± 10 mm

398 ± 10 mm

⁽¹⁾	Camber corrections are not possible. It can only be slightly corrected by pushing the subframe.

⁽²⁾	The toe angle difference can also be indicated negatively in alignment computer, depending on manufacturer.

Specified values valid for all engine versions.

Rear Axle	Basic Suspension	Sport Suspension	Raised Suspension
PR Numbers	G03/G12/G20	G04/G21	G10/G14/G22
Camber	-1° ± 10'	-1° ± 10'	-1° ± 10'
Maximum permissible difference between both sides	maximum 30'	maximum 30'	maximum 30'
Total toe	+20' ± 12'	+24' ± 12'	+16' ± 12'
Maximum permissible deviation from the driving axle	maximum 20'	maximum 20'	maximum 20'
Height. Refer to Height, Measuring .	385 ± 10 mm	370 ± 10 mm	400 ± 10 mm