Handle, Removing And Installing: Installing

Install in the reverse order of removal while doing so note the following:

The selector lever is in the "D" position.

NOTE:

There is the possibility that the button -arrow- can be pressed into the handle. Never install the handle when the button is pressed in.

Fig 1: Identifying Caution For Button

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Move the button into the installation position. Refer to BUTTON IN HANDLE, MOVING INTO INSTALLATION POSITION .

A new handle is delivered with an assembly fastener. Pull out the safety catch in the direction of -arrow- just before installing.

Fig 2: Identifying Direction To Pull Out Assembly Aid Just Prior To Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Handle with Sleeve

-- Install the handle all the way onto the selector lever and lock it.

-- Push the sleeve down to lock it.

Handle with Clamp

-- Install the handle all the way with a new clamp.

-- Clamp off the clamps using Hose Clamp Pliers: VAG1275 .

Continuation for All Handles:

-- Press the button after installation.

NOTE:

If the button stays in the handle after being pressed, this means it was installed incorrectly. If this happens, remove the handle again and move the button in the installation position again. Refer to BUTTON IN HANDLE, MOVING INTO INSTALLATION POSITION . Install the handle again.