Windshield Wiper Motor, Replacing: Installing

-- Insert the Windshield Wiper Motor -V- with the Windshield Wiper Motor Control Module -J400- into the wiper frame and tighten the bolts -arrows-.

Fig 1: Identifying Wiper Frame Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the motor crank -4- to the shaft of the Windshield Wiper Motor -V- -2- so that the three points shown -1, 2, and 3- line up.

Fig 2: Identifying Motor Crank -4-, Wiper Motor Shaft -2- And Alignment Of Points -1 To 3-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Fasten the motor crank and the shaft of the Windshield Wiper Motor -V- with the nut -2-.

-- Push the ball head -arrow- from the linkage -1- onto the motor crank.

Fig 3: Installing Wiper Motor Linkage

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.