Handle, Removing And Installing: Removing

-- Move the selector lever into "D" position.

It is not necessary to pull out the button -arrow- manually. The push button locks in the installation position by itself when the handle is removed.

Fig 1: Handle With Button In Front

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use the : T10383  to carefully pry the shift cover out of the center console insert in direction of -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Handle with Sleeve

Fig 2: Disengaging Knob

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide the sleeve under the handle in the direction of -arrow- to release the handle.

Handle with Clamp

Fig 3: Clamp Under Boot

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Cut the clamp under the boot -arrow- with a side cutter.

Continuation for All Handles:

-- Disconnect the connector from the shift cover.

-- Remove the handle from the selector lever without pushing the button.