ATF Level, Checking: Filling

WARNING: This page is about a different variant/trim than selected.

-- Shake the fluid containers before opening.

-- Fill one liter of ATF.

If ATF Flows Out of the Adapter Hole:

ATF does not need to be topped off.

-- Allow the ATF to drain until it drips.

-- Install the ATF check plug with a new seal. The ATF level test is now completed.

If no ATF Drips Out of the Hole:

-- Add another liter. Refer to Filling .

CAUTION:

Too little or too much fluid will impair the function of the transmission.

Tightening Specifications