Radiator, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If there are small impressions on the fins, pay attention to the following. Refer to RADIATOR AND CONDENSER ASSEMBLY .

-- Replace the O-rings.

-- Place the radiator at an angle in the lower charge air cooler mount and engage the radiators with each other -arrow-. Pull to check that the catch is secure.

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill with coolant. Refer to Coolant Mixture Ratio => Check the coolant level. .

NOTE:

All of the coolant must be changed if the radiator was replaced.