Service Interval Display, Resetting With Vehicle Diagnostic Tester
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the displays indicated in the procedure are not shown on the display. Refer to the Vehicle Diagnostic Tester Operating Instructions.
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING . |
| -- Switch on the ignition. |
| -- Perform the vehicle identification. |
| -- Select "Work with guided fault finding " |
| -- Select the "control module" |
| -- Select "Instrument Cluster" |
| -- Select "identify control module". |
| -- Select "Guided Functions ". |
| -- Select the corresponding service that is to be reset. |
| -- Perform the adaptation according to the "Guided Functions ". |