Battery Transport Mode, Deactivating: Procedure:
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the displays indicated in the procedure are not shown on the display, refer to the Vehicle Diagnostic Tester Operating Instructions.
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING . |
| -- Switch on the ignition. |
| -- Perform the vehicle identification. |
| -- Enter the order data or select "no order". |
| -- Select "control module". |
| -- Select "Data Bus On Board Diagnostic Interface". |
| -- Select "Guided Functions ". |
| -- Select "switch on/switch off transport mode". |
| -- Follow the "Guided Functions " instructions. |