Engine, Securing To Engine And Transmission Holder: Procedure

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Engage the :2024A onto the engine and onto the :VAS6100 .

Fig 1: Engine Lifted

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To be aligned to the center of gravity of the engine assembly, the hole rails must be inserted as shown in the illustration.

-- Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows-.

-- Lower the engine from the :VAS6931 using the :VAS6100 .

-- Remove the transmission alignment sleeve and secure the transmission side of the engine on the :VAS6095A .

Fig 2: Identifying Engine And Transmission Holder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.