A/C Compressor, Removing And Installing On Bracket: Installing

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, 2018 Volkswagen Tiguan Limited, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Thoroughly clean the surfaces on the A/C compressor and bracket.

-- Insert the alignment sleeve -1- in the A/C compressor.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Make sure the alignment sleeves are seated correctly and the contact surfaces are clean. Incorrectly installed alignment sleeves and dirty or damaged contact surfaces can cause alignment irregularities between the A/C compressor and engine. Alignment irregularities over operating time cause damage to the A/C compressor.

NOTE:

There is a risk of damaging the A/C compressor. Refrigerant oil may accumulate in the compression chamber when the A/C compressor is removed.

After installing a new A/C compressor or filling with fresh refrigerant oil, turn the A/C compressor 10 times by hand before installing the ribbed belt.