Overview - Assembly Mounts
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, 2018 Volkswagen Tiguan Limited, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
- Pendulum Support
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- 60 Nm +90°
- Replace after removing
- Bolt
- 50 Nm +90°
- Replace after removing
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Transmission Mount
- With support arm
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Engine Support
- Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Engine Mount
- With support arm
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening Specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
Transmission with Threaded Insert (for Example Heli Coil) for Attaching the Pendulum Support
NOTE:
There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.
Identifying feature: there is a collar on the first thread -arrow-.
Make sure to use the appropriate bolts and observe the tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .