Transmission Mount, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .

-- Release the catch in direction of -arrow- remove the Engine/Motor Control Module -J623- and set it to the side.

Fig 1: Identifying Engine Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and remove the bracket -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Depending on the version different brackets are installed.

-- Unclip the wiring guide -1- upward in direction of -arrows- and move it slightly to the side.

Fig 2: Identifying Wiring Guide

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

Vehicles with Two Transmission Bolted Connections

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the transmission mount -1-.

Vehicles with Three Transmission Bolted Connections

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2-, then the bolts -arrows- and remove the transmission mount -1-.