Securing On Engine And Transmission Holder

Special tools and workshop equipment required

Holding Fixture: VW540
Holding Fixture: VW313
or Engine and Transmission Holder: VAS6095A

Make sure there is transmission fluid in the transmission. Do not turn the transmission with the vents facing downward when transporting or when it is on the assembly stand.

NOTE:

If necessary, remove the bleeder cap and seal using suitable leakproof plugs.

Procedure

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If necessary, drain the ATF.

-- Secure the transmission on the : VW540 -1- with the bolts -arrows-.

-- Use the : VAS6100 to insert the transmission in either the : VW313 or the : VAS6095A .

WARNING:

The center of gravity of the transmission is outside the center of rotation on the holding fixture. To prevent back swing, a second technician must hold the transmission when rotating the transmission.