Overview - Condenser

NOTE:

The image shows a Modine condenser.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Condenser
- Removing and Installing. Refer to CONDENSER, REMOVING AND INSTALLING .
Seal
- Replace after removing.
- Coat with refrigerant oil before installing.
Refrigerant Line
- From the condenser to the inner heat exchanger
- Removing and Installing. Refer to REFRIGERANT LINE FROM CONDENSER TO EVAPORATOR, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Bolt
- 8 Nm
Refrigerant Line
- From A/C compressor to condenser
- Removing and Installing. Refer to REFRIGERANT LINE FROM CONDENSER TO A/C COMPRESSOR, REMOVING AND INSTALLING .
Seal
- Replace after removing.
- Coat with refrigerant oil before installing.
Bracket
- For the refrigerant lines
Cap
- Replace after removing.
- Only installed on all manufacturers
Snap Ring
- Replace after removing.
- Only installed on all manufacturers
Cap
- Replace after removing.
- 5 Nm
Seal
- Replace after removing.
- Coat with refrigerant oil before installing.
Desiccant Bag
- Removing and Installing. Refer to DESICCANT BAG/DRYER CARTRIDGE, REMOVING AND INSTALLING .
Screen
- Removing and Installing. Refer to DESICCANT BAG/DRYER CARTRIDGE, REMOVING AND INSTALLING .
Receiver/Dryer
- Is integrated in the condenser on this version