LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Cooling System [DKFA,CXDB]) >> 19 Cooling System >> Radiator/Radiator Fan >> Radiator, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radiator, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove upper left coolant hose from radiator -arrow-.

Fig 1: Identifying Upper Coolant Hose
GWWN19-10623Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Unclip the air guides -1- on both sides of the lock carrier -2- in direction of -arrows-.

GWWN19-10976Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To do this release the catches -3- in the direction of -arrow- and remove the air guide. Ignore the lower arrows.

-- Through the opening in the lock carrier, press the left and right locking tabs -1- for the radiator downward in direction of -arrow-. Pull the radiator off of the charge air cooler.

GWWN19-10978Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pivot the radiator to the engine and lift upward from the charge air cooler bracket. Remove the radiator downward.