Windshield Wiper Protectors, Removing, Version 1
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- With the engine hood closed, switch the ignition on and off briefly.
-- Within 10 seconds after switching off the ignition, move the windshield wiper lever downward to the mist wipe position.
The wipers move into the service position.
-- Lift the wiper arm off the glass.
CAUTION:
Do not hold the wiper blade to prevent damage.
-- Remove the upper and lower fasteners -arrows-.
-- Remove the protective shield off the wiper blade from the bottom upward as shown.
-- Carefully place the wiper arm back on the windshield.
-- Move the wipers into the end position: turn on the ignition and operate the windshield wiper lever briefly. Turn off the ignition.