Service Interval Display, Resetting Without Vehicle Diagnosis Tester

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Resetting the Oil Change Service

Using the buttons in the instrument cluster.

If the vehicle does not have and instrument cluster text display.

-- With the ignition turned off, press the -3- button and hold it pressed.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- and press the button -1- within 20 seconds.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

If the vehicle does have and instrument cluster text display.

-- With the ignition turned off, press the -3- button and hold it pressed.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release button -3-.

The confirmation request appears in the instrument cluster display.

-- By pressing the button -1- in the windshield wiper lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- or by pressing the button -5- in the multifunction steering wheel to confirm.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

Resetting the Inspection Service

Using the buttons in the instrument cluster.

If the vehicle does not have and instrument cluster text display.

-- Turn off the ignition.

-- Emergency flasher switched on.

-- Press and hold the button -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- and press the button -1- within 20 seconds.

-- Turn off the emergency flasher.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

If the vehicle does have and instrument cluster text display.

-- Turn off the ignition.

-- Emergency flasher switched on.

-- Press and hold the button -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release button -3-.

The confirmation request appears in the instrument cluster display.

-- By pressing the button -1- in the windshield wiper lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- or by pressing the button -5- in the multifunction steering wheel to confirm.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn off the emergency flasher.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.