Reducing Agent Tank, Filling

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Make sure that the vehicle is pay attention to and the ignition is switched off.

Pay attention to the :VAS6960 service/repair/system information.

Only use distilled water to clean AdBlue^® /DEF components. Do not use tap water.

-- Turn off the ignition.

The reducing agent filler neck is in the luggage compartment on the right side.

-- Remove the cover -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the fuel filler cap -1- from the fuel tank filler neck.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the reducing agent tank filler neck with a lint-free cotton cloth soaked in water.

-- Guide the nozzle from the :VAS6960 in the reducing agent tank filler neck and start the refilling procedure.

NOTE:

The nozzle from the :VAS6960 switches off automatically when the maximum fill level is reached.

-- Remove the nozzle.

-- Install the fuel filler cap -1- for the fuel tank filler neck until it audibly engages.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the cover -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.