LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Antilock Brake System (Service Information)) >> 45 Antilock Brake System >> Sensors >> Rotation Rate Sensor And Transverse Acceleration Sensor, Removing And Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rotation Rate Sensor And Transverse Acceleration Sensor, Removing And Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

For the ABS-Mark 60 EC in this vehicle, the Transverse Acceleration Sensor -G200-, the Rotation Rate Sensor -G202- and the Longitudinal Acceleration Sensor -G251- (depending on the vehicle equipment level) are installed in the ABS Control Module -J104-.

It is not possible to replace them separately.

-- ABS Control Module -J104-, Removing and installing. Refer to ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, WITH 4-CYLINDER GASOLINE ENGINE AND ABS MARK 60 EC ABS/EDL/ASR/ESP .