Abs Control Module -J104-, Separating From Abs Hydraulic Unit -N55- (Abs Mark 60 EC Abs/EDL/ASR/Esp)

Special Tools And Workshop Equipment Required 

• ESD Work Surface :VAS6613 
• Torque Screwdriver :VAG1624 
• Torx insert T25

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the transportation protection for the valve domes on the ABS Hydraulic Unit -N55- after separating the ABS Control Module -J104- from the ABS Hydraulic Unit -N55-.

The warranty on the ABS Hydraulic Unit -N55- will not be honored if the transportation protection is missing.

1. Transportation Protection for Valve Body (Foam)
2. M10 Plug
3. M12 Plug

-- Remove the ABS Hydraulic Unit -N55- together with the ABS Control Module -J104-. Refer to ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, WITH 4-CYLINDER GASOLINE ENGINE AND ABS MARK 60 EC ABS/EDL/ASR/ESP .

-- Place the ABS Hydraulic Unit -N55- and the ABS Control Module -J104- on a clean level surface facing upward.

-- Remove the bolts -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the ABS Control Module -J104- from the ABS Hydraulic Unit -N55- in the direction of -arrow- without tilting it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully remove all the seals from the valve domes on the ABS Hydraulic Unit -N55-.

-- Cover the solenoid coils of the ABS Control Module -J104- with a lint-free cloth.

Installing. Refer to ABS Control Module -J104-, ATTACHING TO ABS Hydraulic Unit -N55- (ABS MARK 60 EC ABS/EDL/ASR/ESP) .