Bulkhead, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50Nm :VAG1331
- Cartridge Heater :VAG1939A
- Cartridge Gun :VAG1628
Materials
NOTE:
Refer to the parts information for the part numbers for the materials.
- One-part window adhesive 1)2)3)
- Activator 1)
- Glass/paint primer 1)
- Cleaning solution 1)
- Primer applicator 1)
- Cutting wire 3)
- Cutting wire from the :VAS6452 3)
- :VAS6888/1 6)
1) Follow the manufacturer processing instructions supplied in the packaging.
2) Note the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
3) Cutting strings and cutting wires are an alternative These are only meant to be used once.