Engine, Securing To Engine And Transmission Holder: Procedure

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Release the retainer in direction of -arrow- and remove the engine cover mount -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the mount -1- for the right engine cover -2- from the hole.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the :2024A onto the engine and onto the :VAS6100 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

To be aligned to the center of gravity of the engine assembly, the rail with holes for the lifting hook must be inserted as shown in the illustration.

-- Lower the engine from the :VAS6931 using the :VAS6100 .

-- Secure the transmission side of the engine to the :VAS6095A as illustrated.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.