Amplifier -R12-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition and all electrical consumers and remove the ignition key.

-- Move the left front seat into its highest position and the move it all the back.

-- Pry up the cover -1- in direction of -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -4-.

-- Remove the bolts -2-.

-- Remove the Amplifier -R12- -1- in direction of -arrow- from the bracket -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.