Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the right front seat into its highest position and the move it all the back.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Pull the lever -2- for seat forward/backward adjustment up and hold it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the module carrier -1- for the Cell Phone Operating Electronics Control Module -J949- -3- toward the outside in direction of -arrow A- and lift it on the tunnel in direction of -arrow B-.

-- Tilt the module carrier -1- for the Cell Phone Operating Electronics Control Module -J949- -3- in the direction of -arrow B- out of the outer mount.

-- Turn the module carrier -1- for the Cell Phone Operating Electronics Control Module -J949- -3- around.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors -3 and 4- on the Cell Phone Operating Electronics Control Module -J949- -2-.

-- Remove the Cell Phone Operating Electronics Control Module -J949- -2- from the module carrier -1-.