LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Controls & Housing System (Service Information - Automatic Transmission - 09G)) >> 37 Controls, Housing >> Selector Mechanism >> Selector Lever Cable, Checking And Adjusting >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Cable, Checking And Adjusting: Notes

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Short Description 

To check the selector lever cable for ease of movement, remove it from the transmission and position the removed end so it does not make contact anywhere.

Then selector lever is moved and the selector lever cable installed again on the transmission.

After that, selector lever cable must be adjusted. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

Do not grease the selector lever cable connection!

scientia non olet · About LEMON Manuals