Selector Lever Cable, Checking And Adjusting: Checking
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the selector lever into >>P<<.
-- Loosen the bolt -2- on the selector lever cable -1-.
-- Pry the selector lever cable -1- off the selector lever -3-, for example, using a wrench -2-.
-- Squeeze the retainers and remove the selector lever cable from the cable bracket -arrows-.
-- Move the selector lever from >>P<< to >>S<< and back to >>P<< several times.
- The selector lever and the selector lever cable must have ease of movement at the same time.
- Selector lever cable boot undamaged.
-- Reinstall the selector level cable with the >>loosened<< adjustment screw.
-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .