ATF, Filling

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- With the engine running install the Oil Filler - Adapter 2 :VAS6262/2 hand-tight in the check hole.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Shake before opening.

CAUTION:

The ATF filler tool must be clean and the ATF must not be mixed with any other ATF.

-- Attach the Oil Filler :VAS6262A to the oil bottle. Be sure to read the instructions. Refer to ATF LEVEL, CHECKING .

-- Fill 1 liter of ATF.

-- Remove the Adapter for Oil Filling :VAS6262A at the quick-release coupling and check it.

If ATF Flows Out of Adapter Hole:

ATF does not need to be topped off.

-- Allow ATF to drain until it drips.

-- Install the ATF inspection plug with a new seal. The ATF level test is now completed.

If No Oil Drips Out of the Hole:

-- Add another liter. Refer to ATF, Filling

CAUTION:

Too little or too much ATF will impair the transmission.