ATF Cooler, Removing And Installing, Rectangular Version: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings after disassembly.

-- Install the coolant hoses to the ATF cooler according the markings made during the removal.

-- Check the coolant level. Refer to COOLANT SYSTEM/COOLANT (CZCA, CZDA, CZTA) , or COOLANT SYSTEM/COOLANT (CBPA, CKJA) , or COOLANT SYSTEM/COOLANT (CNLA, CRJA) , or COOLING SYSTEM/COOLANT (CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA) , or COOLANT SYSTEM/COOLANT (CPLA, CPPA, CPKA, CPRA) .

-- Install the battery and the battery tray. Refer to BATTERY .

-- Check the ATF level. Refer to ATF .

-- Install the air filter housing. Refer to AIR FILTER (CNLA & CRJA) , or AIR FILTER (CZCA, CZDA & CZTA) , or AIR FILTER (CBPA & CKJA) , or AIR FILTER (CPLA, CPPA, CPKA & CPRA) .